Machines to cut & form radial loose components - Cut and form Radial components in bulk - TP/TC4 - 1500-1 - TP/LN-500 - 3000-2 - TP/LN-100 - TP/TS1

Radial Loose Components

CUTTING MACHINES

TP/LN-500
The TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade. It can handle any type of radial component regardless of lead diameter, pitch and form.

The upper plate thickness comes at a standard .125" (3.2mm)

Additional plates can be ordered to increase the height, starting from .019" (0.5mm).
Two versions are available:

TP/LN-500/1 Cutting area 2.09x1.7" (53x43mm)	TP/LN-500/2 Cutting area 2.09x3.66" (53x93mm)

The standard grid pattern accommodates most types of components.
Special grid pattern plates can be provided upon request.

Specs TP/LN-500 PDF

top

TP/LN-100
The TP/LN-500 is a pneumatic machine to cut loose radial components. The upper stationary plate determines de cutting height, the standard is .125" (3.2mm).

Additional plates to increase this height are available starting from .019" (0.5mm)

The cutting area is 1.77x2.12" (45x54mm).
Lateral cuts at the most common pitches allow the easy handling of bent leads. The standard grid pattern accommodates most types of components.
Special grid pattern plates can be provided upon request.

Specs TP/LN-100 PDF

top

TP/TC4

Motorized cutting machine for loose radial components. Adjustable speed. Easy and quick manual component feeding. Two belts hold the leads and feed them through the rotary blades.

The cutting length can be adjusted by turning an allen screw located on the right from guide.

TAPE PITCH

The attachment BR3 can be added to the TP/TC4 to handle taped radial components.

It is available for two types of tape hole pitch: 12.7mm (.5") or 15mm (.59").

Specs TP/TC4 PDF

top

The following video shows the TP/TC4 machine.

CUTTING & FORMING MACHINES

TP/SC4
The TP/SC4 is a pneumatic machine for loose radial components.
There are over 20 standard interchangeable dies available.

Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request.


160600 stand-off lock-in	160700 stand-off lock-in led	160800 stand-off outward form	160900 lock-in	161000 straight cut


161200 stand-off lock-in polarity for led	161300 90 bending	161400 surface mounting	161500 stand-off inward form	161700 to spread out and cut


161800 to reduce pitch & cut	162100 power transistor center lead 2.5mm out	162200 To220 center lead spread and lock	162300 To220 center lead spread 3 lead lock	163100 To220 90 center lead 5mm out


162400 To220 stand-off lock-in 3 lead in line	162500 To92 center lead 2.5mm out	162600 To92 center lead spread and lock	162700 To92 center lead spread 3 lead lock	162800 To92 stand-off lock-in 3 lead in line

Specs TP/SC4 PDF

top

We also offer Hand tools for CUT, FORM, OR CUT & FORM leads of Electronic Components.

TP/TS1
The TP/TS1 is a pneumatic machine for loose radial components.
There are over 20 standard interchangeable dies available.
The TS1 is recommended over the TP/SC4 when transistors need to be formed.

Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request.


180600 stand-off lock-in	180700 stand-off lock-in led	180800 stand-off outward form	180900 lock-in	181000 straight cut


181200 stand-off lock-in polarity for led	181300 90 bending	181400 surface mounting	181500 stand-off inward form	181700 to spread out and cut


181800 to reduce pitch & cut	182100 power transistor center lead 2.5mm out	182200 To220 center lead spread and lock	182300 To220 center lead spread 3 lead lock	183100 To220 90 center lead 5mm out


182400 To220 stand-off lock-in 3 lead in line	182500 To92 center lead 2.5mm out	182600 To92 center lead spread and lock	182700 To92 center lead spread 3 lead lock	182800 To92 stand-off lock-in 3 lead in line

Specs TP/TS1 PDF

top

We also offer Hand tools for CUT, FORM, OR CUT & FORM leads of Electronic Components.